Engineering Instructions PDF:
...
Shuttle calibration is retained; however, the insert offset will need to be reset for each Pax Shuffler.
Important: The shuttle insert calibration must be set with the calibration marks in alignment. Version 2.3.3 and future releases will no longer needs to subtract calibration numbers after aligning, as described in an earlier technical bulletin.
...
After setting up the first shuffler you can export the settings you just set to be used on the next unit. The following Settings will be transferred on a USB stick.
...
Green/Red button side
Custom hand recall password
Game Setup
...
In the Utilities menu select USB import / Export
Plug a Fat32 formatted USB drive in the port on the Pax Shuffler
Select Export Settings.
Note: The serial number will auto populate as the export name. There is no need to change this name. If you do change the name, do not add, or leave any spaces in it.Press return on the digital keyboard, start and confirm.
Remove USB drive and proceed to the next shuffler.
Plug USB drive into Pax Shuffler to transfer settings.
Navigate to USB Import / Export in the Utilities menu and select import.
Select the file name of settings to import. Press Start, Press Confirm.
Repeat the previous four steps for all Pax Shufflers at location.
...