...

2 week pm

 1. remove front cover

2.  blow shuffler out with data vac

 3. clean sensors

4. clean rollers

5.  inspect belts and pads

6.  test

 7. wipe down top and covers with glass cleaner

8.  install front cover

3 month pm

 1. remove front and back covers

 2. blow shuffler out with data vac

 3. clean sensors

 4. clean rollers

 5. replace elevator pads

 6. lube worm gear

 7. clear cycles and logs

 8. test

  9. wipe down top and covers with glass cleaner

 10. install covers

6 month pm

1. remove front and back covers

2. blow out shuffler with data vac

3. replace back and face rollers, roller belts and bushings. (DO NOT ROLL NEW BELT OVER PULLEY)

4. replace elevator and sweeper pads

 5. lube worm gear

 6. clean sensors

7. check sweeper and trap door settings

 8. by running sweeper cycle

 9. test shuffler

10. wipe down top and covers with glass cleaner

11. install covers

SEE MANUAL https://youtu.be/eQi75mRbUaM?si=MLMoINJCiYid1Ezi

...

...

...