Engineering Instructions PDF:
| View file | ||
|---|---|---|
|
Instructions addendum:
After a PAX upgrade to 2.3, look at the Current Deck Menu in the User Menu to ensure the most recent deck in use is selected.
...
This would only arise at casinos which changed their card type after installing PAX. To be safe, we should have every PAX looked at as it only takes a moment.
...
Significant Features
New games
3 Card Catch
Added 9 handed generic games with 2, 3, and 5 cards per packet.
Added 8 player versions of MS Stud, Let It Ride, and Four Card Poker.
The display shows the Pax Logo and is no longer blank during normal operation.
Configuration Import / Export to setup one Pax Shuffler and transfer settings to additional
shufflers.The shuttle position values have been corrected for the community cards positions. We no longer
need to compensate by subtracting calibration numbers after aligning.On power up, the shuttle performs an additional homing sequence to find a consistent homing position. We no longer need to test the shuttle home sensor multiple times.
Sensor and Motor Diagnostics have been added the Maintenance, Machine Control menu.
...
Upgrade Instructions
When the Pax S Shuffler is upgraded to version 2.3.3 from a previous software release, some settings will be reset and must be reconfigured.
...
Shuttle calibration is retained; however, the insert offset will need to be reset for each Pax Shuffler.
Important must set: The shuttle insert calibration must be set with the calibration marks in alignment. Version 2.3.3 and future releases will no longer needs to subtract calibration numbers after aligning, as described in an earlier technical bulletin.
...
If it was offset in the past you need to undue the adjustment and remove the offset. Do not skip this step.
...
If set correctly with the previous version the eject offset will not need to be reset.
...
The current deck will be retained.
Delete decks added during the upgrade or decks not used at current casino.
...
Perform the following steps to copy the setting from the current shuffle to the next unit.
USB Import / Export (
After setting up the first shuffler you can export the settings you just set to be used on the next unit. The following Settings will be transferred on a USB stick.
...
Green/Red button side
Custom hand recall password
Game Setup
...
In the Utilities menu select USB import / Export
Plug a Fat32 formatted USB drive in the port on the Pax Shuffler
Select Export Settings.
Note: The serial number will auto populate as the export name. There is no need to change this name. If you do change the name, do not add, or leave any spaces in it.Press return on the digital keyboard, start and confirm.
Remove USB drive and proceed to the next shuffler.
Plug USB drive into Pax Shuffler to transfer settings.
Navigate to USB Import / Export in the Utilities menu and select import.
Select the file name of settings to import. Press Start, Press Confirm.
Repeat the previous four steps for all Pax Shufflers at location.
...