All themes for the Spectra cabinets are supposed to have the topper content on the SSD so the topper will run with the on-board video port.
Warning |
---|
Sometimes the |
content doesn’t show on the topper. |
Solution:
What to do when the topper does not work:
Reboot a couple times. Notice the topper doesn't like to load after a ram clear some times. Its hit or miss. Just keep rebooting.
Note from the field: I had a couple new Spectra games that I’ve had a issue with content loading to the topper. This was after a reboot and a ram clear. “I found after a couple reboot if it still doesn’t load just turn the game off pull the power plug from the power supply count to 10 plug it back in and power up comes on ever time.”
Try the top port instead of the bottom one.
Order new SSDs.
Please get logs from the cabinet and open a service ticket. TAC can look at the logs and see if the media is on the SSD or if there is another reason it is not working.
Tip |
---|
Upgrade the topper firmware. |
**Firmware update instruction**
https://youtu.be/Ed5V64tMRWAIn testing we did not have to install any drivers.
View file | ||
---|---|---|
|
Tools: Waiting to distribute the tools.
Laptop with Windows 10 or 11
SP Tool Software Alpha Display HSO.zip
MStar Tool
VGA cable
USB A-B
Programming file (*.bin)
On the target laptop plug one end of the USB and the other in the MStar tool.
Connect VGA cable from MStar Tool to Monitor (Monitor must be powered on)
Run ISPTool.exe
Check "Use USB" and "Auto release USB" in Config menu of ISP_Tool
Select the “Read” menu and select the target firmware
Click “Connect” button. If connection is correct, Device Type. If not, please click Dis Con button then Connect button again.
Select ‘Auto” menu and ensure all selections match as below. Click Run.
Check to see if programming complete. PASS