Required tools:
11/32” driver
5/16” driver (if needing to replace video card)
#2 Phillip’s screwdriver
Required Parts & hardware:
1 - C020735: BUTTON DECK 10.1” LCD ST42
1 - C030636: HARNESS POWER PDM3 12VDC 48IN
1 – C055708: CABLE DATA USB A to MICRO B 6FT
1 – C030601: DISPLAY HDMI ULTRA SLIM 6FT
Parts possibly needed (based upon pre-install inspection):
C055714: PCBA VIDEO TUL GEOFORCE 1050TI 4 PORT
C54-00024: HDMI to DP adapter (to convert game monitor when using only HDMI cable/port-on-card)
** Pre-Install inspection **
Having a video card that is compatible with the LCD button is critical in the success of the operation. To determine if your existing video card is compatible, pre-inspect the cabinets for conversion to see if you need to order a new replacement card if yours are not compatible.
Rule of thumb: if your existing card has a spare, unused, FULL-SIZED HDMI port; you should be good. Anything else will not be compatible.
Most up-to-date: C055714 – current used card in stock, and what needs to be ordered to replace a non-compatible card:
conversion Process:
Using an AGS white barrel key (or location’s key if applicable) remove the button deck access door located under the deck.
Unfasten x3 thumb screws (use #2 Phillip’s if overtight)
