AGS Field Service Knowledge Base

Skip to end of banner Go to start of banner

Table Touch Screen Issues on Base Image (Temp)

Skip to end of metadata

Created by Emery Redenius, last modified on Jun 14, 2023

Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Problem

Screen orientation is not correct on Base Image and the touch shows up on the wrong monitor.

Solution

With write filter disabled

Go into display settings and move the DT to the right side of the double sided monitor.

Then go to the start menu, open MT 7 Micro touch manager and do what happens in the video below.

No labels

For assistance email support@playags.com or call 1-877-358-6300