AGS Field Service Knowledge Base

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

Problem

Screen orientation is not correct on Base Image and the touch shows up on the wrong monitor.

Solution

With write filter disabled

Go into display settings and move the DT to the right side of the double sided monitor.

Then go to the start menu, open MT 7 Micro touch manager and do what happens in the video below.

  • No labels

0 Comments

You are not logged in. Any changes you make will be marked as anonymous. You may want to Log In if you already have an account.
 

For assistance email support@playags.com or call 1-877-358-6300