/
Set CPU Fan Speed

AGS Field Service Knowledge Base

Set CPU Fan Speed

Do to the amount of heat the Table Controller generates we need to set the CPU fan speed to max which pulls the hot air out of the controller and drops the temp by 20 to 25 degrees.

Make sure to use a wired keyboard for this update. Wireless may not allow you to get into the bios.

  1. With the controller powered off

  2. Connect Keyboard to the controller and power on.

  3. Hold the delete key while the controller is powering on.

  4. In the BIOS use the arrow keys to navigate to the Advanced tab.

  5. Arrow down to HW Monitor and press Enter on the keyboard.

     

  6. In the HW Monitor menu press Enter again and arrow down to select Full Speedand press Enter.

  7. Press F4 to Save and Exit

 

Related content

Table PM (Preventative Maintenance) 1 Year
Table PM (Preventative Maintenance) 1 Year
More like this
Table Progressive Field Service Manual
Table Progressive Field Service Manual
More like this
Table Fan Installation
Table Fan Installation
More like this
Table Controller will not boot
Table Controller will not boot
More like this
Table Game Freezes
Table Game Freezes
More like this
Change Chip Sensor Type
Change Chip Sensor Type
More like this

For assistance email support@playags.com or call 1-877-358-6300