6 Month PM

The 6-month PM (noted on page 19 of the DexS manual) includes additional part replacements including the rollers, roller belts and sweeper arm pads. The items cleaned and replaced during the 3-month PM are due for service again as well at the 6-month PM. This includes the *lubrication of the worm gear and the cleaning of all sensors. Reference pages 25-35 of the DexS manual for these detailed instructions which include helpful images.

1. remove front and back covers

2. blow out shuffler with data vac

3. replace back and face rollers, roller belts and bushings.
   (DO NOT ROLL NEW BELT OVER PULLEY)

4. replace elevator and sweeper pads

5. lube worm gear

6. clean sensors

7. check sweeper and trap door settings

8. by running sweeper cycle

9. test shuffler

10. wipe down top and covers with glass cleaner

11. install covers

There is a Production Kit you can order for all the parts below - C21-00008