The 3-Month PM is more extensive and requires the cleaning and replacement of certain components; mainly the elevator/swing arm pads. The worm Gear must be *lubricated at this time. Reference pages 20-26 of the DexS manual for these detailed instructions.

3 month pm

1. remove front and back covers

2. blow shuffler out with data vac

3. clean sensors

4. clean rollers

5. replace elevator pads (C40-000254 quantity 2)

6. lube worm gear
   *Important; when lubricating the Worm Gear, use only DRY LUBRICANT with PTFT or Teflon as clearly noted on page 25 of the DexS service manual. *

7. clear cycles and logs

8. test

9. wipe down top and covers with glass cleaner

10. Install covers