Hardware

The power button does nothing when pushed one time. If the button is pressed and held in, the controller will do a hard shutdown (do not do this) shut the controller down through the start menu.

Open

 

Open

 

HDMI to Display port adapter and part number:

C54-00127 / MALE DP TO FEMALE HDMI PIGTAIL

Network

The controller will ship with:

• Game Network set to DHCP

• Windows Network set to 10.0.8.9 / 255.255.252.0

Setup

Connect the Axiomtek controller to the network switch and power the controller on.

Logging In

EPC and Sign Controller

Connect a laptop to the network switch the game server is plugged into.

• From the start menu search for and open “remote desktop”

• Input the PC name shown on the front of the controller, example Axiomtek-sc-0001 and hit enter.

• The user is ags and there is no password.

You should see the desktop.

Omni Software Install and Configure.

Techassit

Verify Techassit 4.2 or later is installed prior to inserting the Omni USB.

Go to the C: drive and scroll to the bottom. If a text file of TechAssit 4.2 or later exists continue to Omni software install. If the file does not exist or is not up to 4.2 you will need to install TechAssit 4.2 or later.

Install Videos:

Install Omni Content and display it using Omni:

https://youtu.be/uMMZTYyAxW4

Install Maestro Content on AxiomTek controller and display it using Omni:

https://youtu.be/Q5BkoxyVwR4

Onmi Software Install

• Omni software requires 23.1 OS and will be installed on the Axiomtek box via TechAssist.

• The controller runs a hybrid of Omni / Maestro at the same time.

Insert the USB containing the Omni software and let TechAssist load the software. Once the software is installed the OmniLoader will run. Follow the pictures below:

Hold the escape key to kill the Omni application. It will try to run again right away, you will need to right click on the application on the taskbar and close it completely.

Reboot the Sign Controller through the start menu.

Trouble Shooting and Errors