AGS Field Service Knowledge Base

PAX Card Weight Belt Tension

Owned by Robert Greene
Last updated: Apr 08, 2024 by Emery Redenius
1 min read

This needs to be checked and adjusted if the last few cards are moving slow or not being taken in.

 

If the belt is loose the card weight will not put enough pressure on the last few cards.

The belt should not be loose. To adjust the tension, loosen the four 2.5mm screws.

Push down on the pulley and tighten the four 2.5mm screws.

Check the tension.

 

For assistance email support@playags.com or call 1-877-358-6300