/
Omni From engineering

AGS Field Service Knowledge Base

Omni From engineering

Copy desired sign packages from USB (or other source) to “C:\OmniPackageInstall” folder OR
have the Omni sign packages in a folder labeled “C:\OmniPackageInstall” on your USB (or other
source)

  1. Open Omni Loader from shortcut on desktop

  2. Omni Loader all automatically import the sign packages placed in the “C:\OmniPackageInstall”

folder
Note: Automatic Import occurs every time loader is opened. This can be skipped during the
countdown period. If there are no new sign packages that are to be imported, then just click
“Continue”.

  1. Select the number of displays (this is usually automatically determined and populated based on

connected displays)

  1. Select the appropriate sign type (e.g. Starwall, Pill, Carousel, etc.)

  2. Click “Confirm” to configure sign package to be launched

  3. Click the “Add Package” button

  4. From drop down, select the Omni sign being launched

  5. Click the number of the display being configured

Note: Green = Active | Gray = Inactive
10. Enter the Group ID (this syncs the sign with the games and must match the Group ID that is
configured for EPSs of game that links to sign package)
11. Click “Launch packages” to launch the Omni sign packages to the sign displays
12. Configuration complete

 

Related content

Omni (Axiomtek Sign Controller (AXIOM-SC))
Omni (Axiomtek Sign Controller (AXIOM-SC))
Read with this
Sign Controller Pre-Install Steps
Sign Controller Pre-Install Steps
Read with this
Sign only shows a blue screen
Sign only shows a blue screen
Read with this
Sign Errors and Troubleshooting
Sign Errors and Troubleshooting
Read with this
Parts - New Request (Quote or PO requests)
Parts - New Request (Quote or PO requests)
Read with this

For assistance email support@playags.com or call 1-877-358-6300