AGS Field Service Knowledge Base

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

LCD Topper / Raspberry Pi

The LCD topper is run by the Raspberry Pi - part number C020838

The LCD receives power from the Power IO and the Raspberry receives power from a power brick, or a Micro USB cable plugged into the blue USB 3.0 ports inside the logic box on the motherboard.

Loading Content to the Raspberry

  1. Format a USB stick FAT32 (does not work as exFat) Best to use a 2 or 8 gig stick.

  2. Create a folder on the usb labled “media”

  3. Load only one digital content file into the media folder. The name of the file cannot contain any spaces.

  4. With the power to the Raspberry Pi unplugged, insert the USB and apply power to the Raspberry Pi

  5. The content will auto load. Watch the screen, it will tell you to when to remove the USB.

  • No labels