Introduction
The NCFI, Non-Controlled Firmware Installer, is a tool used to update the firmware on a cabinet while in the field. It is a simple and effective tool to use.
Class 3 games are setup to run the NCFI tool but you may need to remove the SATA cable from the SSD if it doesn’t run as expected.
| Info |
|---|
Class 2 games will require the System CF SATA cable to be connected to the Top Left port on the 2015 logic box. |
Compact Flash / Startup
To access the NCFI tool, Insert the NCFI CF into the System CF slot on the logic box and power the cabinet on.
...
Any firmware that is Up to Date will Display Green. If the Firmware is Out of Date, it will display in Yellow.
...
Tap the Check Box to Select the Firmware to be Updated.
...