...
If Auto configure does not work or there is an error in the bottom left corner, log into the controller and open quick config. If auto config is available, auto config the EPS.
| Note |
|---|
Before doing any additional steps, make sure you have completed one reboot of the controller through the start menu. |
If these steps do not work, you may need to verify the progressivecontroller.xml file.
If the file is empty, copy and paste the info listed below this picture and save.
| Warning |
|---|
IF THE FILE IS NOT EMPTY DO NOT CHANGE THE FILE. IT IS NOT THE PROBLEM unless every word in the document is NULL NULL NULL, then it is the problem. |
...
| Code Block |
|---|
<ProgressiveController>
<DoProgressive>true</DoProgressive>
<ForcedBroadcast>
<BroadcastAddress>10.0.5.1</BroadcastAddress>
<BroadcastPort>4503</BroadcastPort>
<IsUnicast>false</IsUnicast>
</ForcedBroadcast>
<PortAssignment/>
<MaestroPortAssignment/>
</ProgressiveController>
|
...
Remove the game from Progressive Manager
Delete the game from Quickconfig
Delete the game from dhcpmanagement
Shut the game off
Restart the Progressive Controller
Turn the game on
Auto-config at the game.
...
Follow the steps above and if they do not work, Support will need to assist with a solution. If the games were communicating with the controller before the controller was finished with the upgrade this error will occur and the controller will need to be reset.
Search Terms - Atlas Prog. Update 1023 (198)