...
Embedded Progressive Controller requires an isolated network on a standard gigabit switch. Use the normal Game port on the logic to the switch for every game.
Two games must be set as Host and no more than two or it will cause issues.
No more than eight games connected on the same EPC network.
All game must share the same set of pools no extras.
All games must be EPC and not on a progressive controller.
All games must be the same hold percentage.
All games must be the same Scaling if applicable.
Games do not need to be the same LCs.
| Warning |
|---|
This does not work with all titles. If you have questions about what themes work together get with TAC or Product Support who will request info from Product Management. |
| Gliffy | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
...
|
Initial Setup Process After RAM Clear
...
Select the check box “Set this EPS as Embedded Host” if the EPS being configured will be used as progressive Host.
| Warning |
|---|
You NEED to set two games as “Embedded Host” but only two games. Do not check the box on all the games, just two of them. |
...
Continue to remaining initial setup process
...
Change Max Value or Pool Contribution Rate
Deposit Funds
Activate inactive pool
Change a Pool Name
View Progressive Wins records from all the linked EPS’s
...
TroubleShooting
When a Host goes down you will need to Ramclear another game and set it as Host or repair the orignal Host. The pic below is what you will see when one of the Hosts goes offline.
...