| Info |
|---|
The shuttle will need to be removed to tighten the 4 screws on the bracket to the linear guide. |
...
The shuttle bracket is attached to the belt. Slide the shuttle bracket all the way up to access the four 2mm screws on the bracket. Remove one screw at a time and use a drop of LOCTITE 222 Purple Low Strength Threadlocker on each screw. Reassemble the shuffler and check the insert offset and test the shuffler.
...
**** LOCTITE IS ONLY USED ON THESE FOUR SCREWS ****
**** ONLY USE LOCTITE 222 Purple Low Strength ****
