HHR_3D Initial Configuration Procedure
Please ensure the required connections are established prior to following the configuration procedure
Active network connection between cabinet and HHR server
Active SAS connection to the cabinet
Initial configuration instruction procedure:
Insert System CF and Game SSD into Logic Case and turn the cabinet On
When the game comes up, it will show a config error
Turn the cabinet Off and remove System CF
Insert RAM Clear CF into the System CF slot and turn the cabinet On
The game will run through RAM Clear steps and the display will turn off after its complete
Turn the cabinet Off, remove the RAM Clear CF, insert the System CF and turn the cabinet On
On the Server Configuration screen, in the address bar, enter the HHR Server URL and press Connect to URL
On the Game Configuration screen, enable the denomination and select the desired payout and press Done : Please refer to the Game PAR sheet to set the correct desired hold configuration. For example, setting 90% configuration is not actually 10% hold, it is less due to progressives.
Open Main door and Logic door and continue through remaining configuration
On the Configuration Setup menu, press Machine Settings
Press Machine Configuration, set the desired settings, press Save and then Back
Please ensure the Machine Number is unique for the Exacta system NOTE: Please ensure the Machine Number is unique for the Exacta system
Press SAS Settings, configure SAS settings as desired by the customer, press Save and then Back
Press Credit Limits, verify limits, press Save and then Back
Press Bill Limits, verify limits, press Save and then Back
Press Server Settings, press Save and then Back
Press Back to go back to the Configuration Setup screen
Press Time Settings, verify/set current date and time (24hrs format), and press Save and then Back
Press Finish Configuration
Close Main door and Logic door
The game screen will load once all configuration is set and all necessary connections are established