AGS Field Service Knowledge Base

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Current »

Door open error but Cherry S/W is not the issue

Remove the cover to the controller and find the battery on the left side. There may be a strip of plastic keeping the battery from making contact, remove plastic strip. If this doesn't resolve the issue, remove the board the battery is connected too and re-seat all the connection on it.​

 

If that doesn't work, go in to the AGS folder at C/AGS/AGStablesStax/Assets and find the Config.xml file.  Open it, if it doesn't contain any code, you need to replace that file from a known good controller. 

  • No labels