This must be checked on install and anytime the sweeper assembly is removed
If this setting is not set correct it could cause agitation errors
Once the shuffler is turned on push the green and red buttons at the same time for 5 seconds or untill the green and red lights shut off.
Next scroll to the Setup Menu by pressing the green button. At the Setup Menu press the red button.
Next scroll to the Sweeper setup and press the red button.
Next enter the password.
Scroll to the sweeper cycle.
Press the red button to run the sweeper cycle.
When the Sweeper cycle is running check that the sweeper arms stop in the correct position.
0 Comments