AGS Field Service Knowledge Base

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

Using an USB A to B cable connect the cable to the USB-B port on the printer with power and the other end in to the laptop.

\uD83D\uDCD8 Instructions

  1. Download the drivers from here if necessary. Future logic program and driver.

  2. follow the steps in the video link below.

gen_2_firmware (1080p).mp4

  • No labels

0 Comments

You are not logged in. Any changes you make will be marked as anonymous. You may want to Log In if you already have an account.
 

For assistance email support@playags.com or call 1-877-358-6300