AGS Field Service Knowledge Base

Future Logic Gen 2 Universal Firmware

Owned by Emery Redenius, created
Last updated: Jan 12, 2024
1 min read

Using an USB A to B cable connect the cable to the USB-B port on the printer with power and the other end in to the laptop.

You may need to get with IT to install the program needed to install the software.**

*If printer gives an error in device manager you need to turn off integrity checks.

In admin cmd bcdedit.exe /set nointegritychecks on

 Instructions

  1. Download the drivers from here if necessary. Future logic program and driver.

  2. follow the steps in the video link below.

 

 

For assistance email support@playags.com or call 1-877-358-6300