...
C40-00300 - Video Card Fan
C080031 - Cmos Battery 2032
C40-00324 - Power Button
C101277 - UPS Battery
C002205 - Hardware kit w/straps (if needed to clean up cable management)
Required Tools:
Philip Screwdriver - 261 / PH0 x 50
Philip Screwdriver - 261 / PH1 x 60
Plate Head Screwdriver - 0.4 x 2.5 x 75 320N
USB Keyboard
Blower vacuum
Scott Shop Towels
...
The following steps need to be performed on a yearly basis
...
Replace Video Card Fan - (if not recently replaced)
...
Replace 2032 Cmos CMOS Battery C080031
when replaceing the battery you will need a keyboard on boot up to press F1 to continue to boot up.
Once logged back into the controller you will need to confirm it has the correct: date, time, timezoneBefore you remove the battery, make sure to take note of the battery’s orientation so you know which way to install in the new one.
...
Clean table controller of dust and debris
Clean up / manage cabling.
Add power button if not already installed
...
Replace UPS Battery - C101277
Check to ensure
Sensors work
Touch Screen works
BIOS Setup
Go to BIOS Setup after replaced the CMOS battery.
Press F1 or Delete key to get in into the BIOS Setup
Confirm with the correct: date, time, timezone
Go to ‘Advanced’ tap to increase the HW ‘Fan Speed’
Set CPU Fan to 100%
Set CPU Fan Speed
...