AGS Field Service Knowledge Base

Table PM (Preventative Maintenance) 1 Year

Owned by Emery Redenius
Last updated: Feb 27, 2024
2 min read

PM Parts

The following items need to be replaced or added per table.

  • C40-00300 - Video Card Fan

  • Purchase locally - CMOS Battery 2032

  • C40-00324 - Power Button

  • C101277 - UPS Battery

  • C002205 - Hardware kit w/straps (if needed to clean up cable management)

Required Tools:

These should be part of the Standard Tech tool kit.

  • Philip Screwdriver - 261 / PH0 x 50

  • Philip Screwdriver - 261 / PH1 x 60

  • Plate Head Screwdriver - 0.4 x 2.5 x 75 320N

  • USB Keyboard

  • Compressed Air Blower vacuum

  • Scott Shop Towels

The following steps need to be performed on a yearly basis

PM Steps

  • Replace Video Card Fan - (if not recently replaced)



Video Card Fan Replaement
Video Card Fan Replacement

 

  • Replace 2032 CMOS Battery C080031

    • Before you remove the battery, make sure to take note of the battery’s orientation so you know which way to install in the new one.

  • Clean table controller of dust and debris

  • Clean up / manage cabling.

  • Add power button if not already installed

  • Replace UPS Battery - C101277

  • Check to ensure

    • Sensors work

    • Touch Screen works

  • BIOS Setup

    • Go to BIOS Setup after replaced the CMOS battery.

      • Press and hold the Delete key to get in into the BIOS Setup

        • Confirm with the correct: date, time, timezone

      • Go to ‘Advanced’ tap to increase the HW ‘Fan Speed’

 

For assistance email support@playags.com or call 1-877-358-6300