PM Parts
The following items need to be replaced or added per table.
C40-00300 - Video Card Fan
Purchase locally - CMOS Battery 2032
C40-00324 - Power Button
C101277 - UPS Battery
C002205 - Hardware kit w/straps (if needed to clean up cable management)
Required Tools:
These should be part of the Standard Tech tool kit.
Philip Screwdriver - 261 / PH0 x 50
Philip Screwdriver - 261 / PH1 x 60
Plate Head Screwdriver - 0.4 x 2.5 x 75 320N
USB Keyboard
Compressed Air Blower vacuum
Scott Shop Towels
...
The following steps need to be performed on a yearly basis
PM Steps
Replace Video Card Fan - (if not recently replaced)
...
Replace 2032 Cmos Battery (tech to purchase so we know the battery is new)CMOS Battery C080031
Before you remove the battery, make sure to take note of the battery’s orientation so you know which way to install in the new one.
...
Clean table controller of dust and debris
Clean up / manage cabling.
Add power button if not already installed
...
| Include Page | ||||
|---|---|---|---|---|
|
Replace UPS Battery - C101277
Check to ensure
Sensors work
Touch Screen works
BIOS Setup
Go to BIOS Setup after replaced the CMOS battery.
Press and hold the Delete key to get in into the BIOS Setup
Confirm with the correct: date, time, timezone
Go to ‘Advanced’ tap to increase the HW ‘Fan Speed’
Set CPU Fan to 100%
Set CPU Fan Speed
| Include Page | ||||
|---|---|---|---|---|
|
...