AGS Field Service Knowledge Base

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

This needs to be checked and adjusted if the last few cards are moving slow or not being taken in.

If the belt is loose the card weight will not put enough pressure on the last few cards.

The belt should not be loose. To adjust the tension, loosen the four 2.5mm screws.

Push down on the pulley and tighten the four 2.5mm screws.

Check the tension.

  • No labels

0 Comments

You are not logged in. Any changes you make will be marked as anonymous. You may want to Log In if you already have an account.
 

For assistance email support@playags.com or call 1-877-358-6300