AGS Field Service Knowledge Base

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Current »

Cause

  1. Belt clamp not aligned with motor pulley.

  2. Belt tension is too tight.

  3. Ejector caught on cards in shuttle

Solution

  1. Loosen belt clamp, move belt to align with motor pulley and tighten camp.

  2. Loosen belt tension.

  3. In the Machine Control menu adjust offset to center ejector

  • No labels

0 Comments

You are not logged in. Any changes you make will be marked as anonymous. You may want to Log In if you already have an account.
 

For assistance email support@playags.com or call 1-877-358-6300