/
PAX Ejector stops in the extended position.

AGS Field Service Knowledge Base

PAX Ejector stops in the extended position.

Owned by Emery Redenius
Last updated: Aug 22, 2023
1 min read

Cause

  1. Belt clamp not aligned with motor pulley.

  2. Belt tension is too tight.

  3. Ejector caught on cards in shuttle

Solution

  1. Loosen belt clamp, move belt to align with motor pulley and tighten camp.

  2. Loosen belt tension.

  3. In the Machine Control menu adjust offset to center ejector

Related content

PAX Not Feeding Last Few Cards
PAX Not Feeding Last Few Cards
AGS KNOWLEDGE BASE
More like this
PAX Not able to move cards to the staging position.
PAX Not able to move cards to the staging position.
AGS KNOWLEDGE BASE
More like this
PAX Shuttle Home Position #32 Sensor
PAX Shuttle Home Position #32 Sensor
AGS KNOWLEDGE BASE
More like this
PAX Field Service and Setup Manual
PAX Field Service and Setup Manual
AGS KNOWLEDGE BASE
Read with this
PAX Ejector leaving cards behind or making scraping sound.
PAX Ejector leaving cards behind or making scraping sound.
AGS KNOWLEDGE BASE
More like this
PAX Shuffler will not initialize; cooling fan is running.
PAX Shuffler will not initialize; cooling fan is running.
AGS KNOWLEDGE BASE
Read with this

For assistance email support@playags.com or call 1-877-358-6300