AGS Field Service Knowledge Base

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

Issue Found:

The sweeper assembly may contain a manufacturing flaw causing it to be too dificult to turn.

Resolution:

Inspect the sweeper assembly. Make sure it moves smoothly if it doesn’t, replace the whole assembly with C130548

Sweeper Inspection.mov

HD Youtube Version of the inspection video.

https://youtu.be/EIUic6VyZfs?si=fWmeYM9UWnQ4fsJx

  • No labels

For assistance email support@playags.com or call 1-877-358-6300