AGS Field Service Knowledge Base

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

\uD83E\uDD14 Problem

Unable to RDP (remote) into the Digital Sign

\uD83C\uDF31 Solution

If the progressive controller shows the sign controller in DHCP management but you are unable to RDP into the sign controller via the pc name or the IP address, follow the steps below:

  1. Delete the game from DHCP management

  2. Power cycle the sign controller

  3. Check the new IP address in DHCP management and RDP into the new IP address.

If this didn’t fix the issue, connect a keyboard, mouse, and monitor and check if the firewall is enabled.

If the controller pulls an IP Address below10.0.8.10 it will not show up in DHCP management.

  • No labels