AGS Field Service Knowledge Base

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Cause

  1. Belt clamp not aligned with motor pulley.

  2. Belt tension is too tight.

  3. Ejector caught on cards in shuttle

Solution

  1. Loosen belt clamp, move belt to align with motor pulley and tighten camp.

  2. Loosen belt tension.

  3. In the Machine Control menu adjust offset to center ejector

  • No labels

For assistance email support@playags.com or call 1-877-358-6300